|
Clear Ultra High Solids Compliant (Year
2007) Lacquer
| Information Panel
|
| Properties |
- The 'bench mark' in high solids, top quality
A/C's
- Over 64% solid level, exceeds current VOC
legislation
- Superb flow properties
- Formulated with anti-scuff additives
|
| Uses |
High quality interior
joinery & furniture |
| Topcoat |
AC3 (2007 Compliant)
Clear 10% sheen
AC3 (2007 Compliant) Clear 25% sheen
AC3 (2007 Compliant) Clear 35% sheen
AC3 (2007 Compliant) Clear 50% sheen
AC3 (2007 Compliant) Clear 90% sheen |
| Basecoat |
AC3 (2007 Compliant)
Sanding Sealer |
| Thinners |
ACT Standard Thinners
ACT Fast Dry Thinners
ACT Anti-Bloom Retarding Thinners |
| Cleaning |
ISF Spray Gun Cleaner |
| Equipment |
Conventional airless
/ airmix or HVLP spray equipment |
| Direction
for Use |
- Catalyst Mix Ratio: Mix 9 Parts AC3 Part A
with 1 Part AC3 Catalyst
- Apply a light coat of AC3 Sealer, allow to
dry, de-nib & apply another sealer coat
as necessary
- After a further de-nib apply a full even coat
of the AC3 Top Coat
- Once catalysed, thinners are not normally
necessary, however ACT thinners may be used
if required up to a maximum of 10% by volume
- Allow to dry overnight prior to packing
- AC3 should not be used over pre-catalysed
products
|
| Note |
Please ensure that the
total system film thickness (DFT) does not exceed
150 microns. Always lightly sand between coats to
assist adhesion. Maximum 2 coats in any 8 hours. |
| Drying
Times |
20-30 minutes touch dry,
recoat time 60 minutes |
| Max Resistance
|
7 days |
| Coverage |
12-15 square metres per
litre |
| Mix Ratio
|
2 Part 9:1 |
| Shelf
Life |
12 months |
| Pot Life
|
36 hours |
| Pack
Size |
5 litres & 25 litres |
|
