|
Clear Two Component Lacquer (BS 6250)
| Information Panel
|
| Properties |
- Fast drying two component PU system
- Surpasses BS6250 severe use - stain &
chip resistant
- Good flow & film clarity produces a superbly
smooth finish
- Hardwearing with good marr & water resistance
|
| Uses |
High quality interior
joinery & furniture |
| Topcoat |
RP1 (PU) Clear 10% Sheen
RP1 (PU) Clear 25% Sheen
RP1 (PU) Clear 35% Sheen
RP1 (PU) Clear 50% Sheen
RP1 (PU) Clear 90% Sheen |
| Basecoat |
RP1 (PU) Clear Sanding
Sealer |
| Thinners |
RPT (PU) System Thinners |
| Cleaning |
ISF Spray Gun Cleaner |
| Equipment |
Conventional airless
/ airmix or HVLP spray equipment |
| Direction
for Use |
- Catalyst Mix Ratio: Mix 4 Parts RP1 Part A
with 1 Part RP1 Catalyst
- Apply a light coat of RP1 Sealer, allow to
dry, de-nib & apply another sealer coat
as necessary
- Then after a further de-nib apply a full
even coat of the RP1 Top Coat
- This product contains isocyanates
|
| Note |
Please ensure that the
total system film thickness (DFT) does not exceed
150 microns.
Always lightly sand between coats to assist adhesion.
Maximum 2 coats in any 8 hours. As the catalyst
contains Isocyanate the use of air-fed masks is
required whilst spraying. |
| Drying
Times |
Touch Dry in 15-20 minutes,
recoat time 60 minutes |
| Max Resistance
|
7 days |
| Coverage |
8-10 square metres per
litre |
| Mix Ratio
|
4:1 |
| Shelf
Life |
12 months |
| Pack
Size |
5 litres & 25 litres |
|
