Application Information for Shellac Sanding Sealer

Products

    • Shellacs
    • Floor Finishes
    • Lacquers
    • Wood Stains
    • Waxes
    • Repair &       Restoration

Application Information
• Shellac Polish Application • Shellac Sanding Sealer Application • Aquastain Application • Aquacoat SP Application • Aquacoat XTRA Application • Polyurethane Varnish Application • Transeal Application

Shellac Sanding Sealer Application

Shellac Sanding Sealer is made from the finest quality shellacs. It has been specially formulated to provide a quick drying and easily sanded primer for wood for interior use.

Information Panel
Properties	Available in both white and brown grades Heavy consistency (5.5lbs/5L) which allows considerable thinning with Methylated Spirit We also supply 1877 Shellac Sanding Sealer which is a ready for use version
Direction for Use	Shellac Sanding Sealer may be applied by rubber, brush, spray or cloth. Methylated spirit being added where necessary to adjust the consistency. Excessively thick coats should be avoided. The sealer should be applied to the wood either untreated or previously filled and stained. When dry it sands easily without clogging the paper and provides an excellent smooth base for overcoating with shellac or wax polish. An attractive satin finish for decorative work can be obtained by applying two coats of shellac sanding sealer and after lightly sanding the second coat apply a coat of SUPERWAX White polish with a cloth or OOOO steelwool pad. Rub up with a soft clean cloth. This finish is ideal for application to timber doors and creates a natural looking finish.
Drying Times	Rapid drying . Recoat time about 30 minutes.
Coverage	Approximately 15 square metres per litre, dependent on wood and porosity.
Application Tools	Brush, Spray or cloth.
Thinners	Methylated Spirit
Stock Sizes	Available in 1 litre, 2½ litre and 5 litre containers
Safety	Shellac Sanding Sealer is HIGHLY FLAMMABLE. Smoking and other sources of ignition should be prevented. Before using read the Safety Data Sheet and warning label on the container.

A member of the
Make Works directory
of Scottish industry

Smith and Rodger Ltd
32-36 Elliot Street, Glasgow G3 8EA
t 0141 248 6341
f 0141 248 6475
e info@smithandrodger.co.uk